عنوان ترجمه فایل فارسی: مشخصه های کلیدزنی و پایداری دوسویه لیزرهای حلقه ای نیمه هادی با تزریق نوری بیرونی.
عنوان نسخه انگلیسی: BISTABILITY AND SWITCHING PROPERTIES OF SEMICONDUCTOR RING LASERS WITH EXTERNAL OPTICAL INJECTION
مرتبط با رشته های : برق و الکترونیک
تعداد صفحات مقاله فارسی: ۲۶ صفحه
این فایل ترجمه شده به صورت ورد word می باشد و دارای امکان ویرایش هست.
و دریافت رایگان متون لاتین در قسمت پایین با فرمت pdf آمده دانلود است.
قسمتی از متن انگلیسی:
The numerically simulated dynamic
transient following the external injected optical continuous wave is
shown in Fig. 4. The SRL is initially lasing in CCW direction and its
lasing direction switches to CW when an external optical continuous wave
is injected to the initially nonlasing CW direction. Settling time,
which is defined as the time needed for the power in both directions,
after switching, to settle to within 10% of the initial optical power in
the CCW direction, is measured from simulation and its minimum value at
certain detuning frequency and injection ratio are shown in Fig. 5(a)
and (b). From Fig. 5, we can see that minimum settling time decreases
with increasing injection power, and the smallest value appears in the
negative detuning frequency side. The sudden rise of the minimum
settling time in CW direction compared with that in CCW direction at
large negative detuning frequency and high injection sides is because
that the final optical power in CW direction exceeds 110% of the initial
optical power in the CCW direction
جهت مشاهده ادامه این مقاله بر روی متن زیر کلیک نمایید.
.
